Furman wiht SMP and LiFT has the most protection and lowest amount of interference.
House wide surge suppressors are a good idea, but they do nothing for noise.
House wide surge suppressors are a good idea, but they do nothing for noise.
Clean Power without the drawbacks of Conditioning Filtering. Advice?
Hi-
From reading i see there is a lot of talk on the drawbacks of Conditioning filtering. Dynamics and freq. limitations etc.
I want to ask if there is a power strip+cord that are not filtering. I think i could possibly get away without conditioning.
From searching it looks like there are the cheapo strips that you don't want to use OR Conditioning strips.
Wondering if there is a good reliable strip that does not screw around with the sound and can also deliver to an 800w consumption tube amp.
Thanks!
From reading i see there is a lot of talk on the drawbacks of Conditioning filtering. Dynamics and freq. limitations etc.
I want to ask if there is a power strip+cord that are not filtering. I think i could possibly get away without conditioning.
From searching it looks like there are the cheapo strips that you don't want to use OR Conditioning strips.
Wondering if there is a good reliable strip that does not screw around with the sound and can also deliver to an 800w consumption tube amp.
Thanks!
- ...
- 65 posts total
I have a high quality power strip that I bought some years ago- it was being promoted by Naim at the time (though I don't own any Naim equipment). No power switch or pilot light, IEC receptacle for incoming power so you can use a higher quality power cord if you like. I can go look at the brand- it is currently in use in my vintage system. |
Here you go...... https://www.audioquest.com/ac-power/ac-power-conditioners/niagara-1000 Garth Powell spent years at Furman. |
- 65 posts total