Clean Power without the drawbacks of Conditioning Filtering. Advice?


Hi-

From reading i see there is a lot of talk on the drawbacks of Conditioning filtering. Dynamics and freq. limitations etc.

I want to ask if there is a power strip+cord that are not filtering. I think i could possibly get away without conditioning.
From searching it looks like there are the cheapo strips that you don't want to use OR Conditioning strips.

Wondering if there is a good reliable strip that does not screw around with the sound and can also deliver to an 800w consumption tube amp.

Thanks!
128x128dumbeat
Check out "The Cable Company". They have a lot of power distribution products. I use an Acoustic Revive in my system. It's a good one but Furutech, Oyaide, Synergistic Research, etc. also make them. Instead of an extension cord, I'd look for a power cord (on the site as well). 
I have two of these: http://www.cullencable.com/111-2/ and they work just fine. With a little bit of sleuthing, you can find other brands that work as well for around the same price.

All the best,
Nonoise
Wiremold is the power strip @whart is talking about no lights or leds or switches.
That's right, Wiremold is the power strip recommended by Naim.
Commercial grade, no filtering or extra circuits, but does use a 6 ft. captive cord. I use one and find it transparent.
https://www.mscdirect.com/industrialtools/wiremold-power-strip.html

Cullen is a highly rated strip for clean transfer from mains.