Clean Power without the drawbacks of Conditioning Filtering. Advice?


Hi-

From reading i see there is a lot of talk on the drawbacks of Conditioning filtering. Dynamics and freq. limitations etc.

I want to ask if there is a power strip+cord that are not filtering. I think i could possibly get away without conditioning.
From searching it looks like there are the cheapo strips that you don't want to use OR Conditioning strips.

Wondering if there is a good reliable strip that does not screw around with the sound and can also deliver to an 800w consumption tube amp.

Thanks!
128x128dumbeat
That's right, Wiremold is the power strip recommended by Naim.
Commercial grade, no filtering or extra circuits, but does use a 6 ft. captive cord. I use one and find it transparent.
https://www.mscdirect.com/industrialtools/wiremold-power-strip.html

Cullen is a highly rated strip for clean transfer from mains.
 
@dumbeat this is what you might consider to purchase: https://www.usaudiomart.com/details/649014151-cablepro_revelation_fb_8_outlet_power_strip_with_all_o...
This unit has noise reduction etc.

https://www.computeraudiophile.com/forums/topic/34636-cablepro-revelation-power-strips-stereophile-r...


I have a CablePro Integrity and it works very well, I highly recommend it. No noise reduction in my unit just direct power. These are hard to come by.




I took a look at mine - a CablePro NoiseTrapper Revelation. This is probably older than the Wiremold one? Not available any more? NoiseTrapping? I thought it was completely featureless. Oh, well. 
Works fine.