JC3+ With Kleos SL?


Hey Folks,

I am considering trading in my Kleos for a Kleos SL.  Has anybody tried one of the SL versions of the Kleos, Etna, or Atlas with the Parasound JC3+?  As you may know the SL needs more gain and the rated 64DB gain of the JC3+ is below the 65DB gain recommended by Lyra and the US distributor Audioquest.

Thanks,
Robert
128x128robob
So let me quote Lyra and then I have a question.  They say, "Most users (and phono stages) will benefit from the regular Kleos with much higher output and considerably more energy; resulting in a much better signal-to-noise ratio."  

The energy part is interesting.  Are the lower output carts less dynamic?  The fact that they say higher output and more output in reference to the regular Kleos begs the question.

Enjoying the discussion:-)
@lewm. The interaction with my preamp and amp were not an issue, the preamp I utilized at the time had no problem with a cartridge that was spec’d at 0.35mv. I agree there are several issues that can crop up that affect the outcome of the pairing, but IME it isn’t wise to push the gear to the max, just because we can.
I think the warning, and that’s the way I read it, that Rob posts above from Lyra is there for a very good reason. I totally respect that they put that out there, as so many other ultra low output cartridge manufacturers, like Ortofon as an example, don’t bother.
Unfortunately, on paper is rarely going to tell you the whole story...on paper my 0.25 mV cartridge should have worked, which is why I bought it...in reality...not so much!

I repeat: Driving a phono stage capable of 65 dB of gain with a cartridge that puts out 0.25mV under standard conditions is not per se “stress”-ful. I don’t suggest that you didn’t hear what you heard. I do think maybe there was some unknown factor that affected your results. In general, I agree with you that ideally you want all components to operate within their comfort zone. Or maybe you were picking up RF, etc. There are many possibilities.
Ok, here’s my question for the OP and lewm.Why do you think that Lyra and the distributor both recommend a phono stage with at least 65db of gain, vs one that has 64db of gain? Could it be that they know something that lewm doesn’t? 
I think they are just being safe and don’t want folks unhappy and trying to return a handbuilt $4k cartridge. Not sure I mentioned it but they did say my setup should work fine. I do have other phono pres, including a tubed one with gobs of gain that I can use if necessary. I think my old PS Audio GCPH has switchable gain.

Called Lyra with a card number, they sent the RMA info so now I need to box it up and ship it.

Take it EZ,
Robert