I hope you weren’t using a bulk tape eraser. Those are way too powerful to demagnetize a tape deck, and have pretty short duty cycles
Akai 747 w/DBX question
Hopefully there are still some reel to reel folks out there. So I currently have the 747 w/out DBX, and I have an opportunity to pick up the DBX version from a local person who owns a rather hi end audio store here in town. My question is: Is the Dynamic range extension worth the extra coin over the non DBX version? I don't record music from CD's to tape, and the added DBX if it works well should do wonders for recording from vinyl. I have owned reel to reels all my life but never this piece. Just curious if its worth the effort, and if you think it will it be an improvement.
- ...
- 31 posts total
sleepwalker65355 posts01-09-2019 10:26pmI hope you weren’t using a bulk tape eraser. Those are way too powerful to demagnetize a tape deck, and have pretty short duty cycles No its a head demagnetizer with the rubber coated tip. |
barnettk I have a demagnetizer, and the way I did it was as follows: Start about 6 feet out and slowly work my way to the head (without touching it) then slowly work my way back away from the head.That is not the correct way to use a head de-mag, according to the instructions I’ve seen that accompany them. The de-mag should be placed close to the head - not touching, as you state - and then energized. After rotating it closely around the head (or tape guide), the de-mag should then be gradually drawn away from the head, and then switched off. |
- 31 posts total