loose tubes


qustions on a tube int amp anthem int 1, if i take the tube up a bit from there sockets so there not sitting in all the way the sound becomes a heck of a lot better in every way , will this hurt anything cause it does sound that much better thank you
128x128sonus
Kitch, what kind of "fancy" sockets. I'm running too slow now to download the catalog.
Dekay,Nh-fi, in the Michael Percy Audio catalogue it says:

Super Premium Tube Sockets: Where only the very best in the world will do! Machined Teflon or epoxy impregnated wood laminate, 9 pin chassis mount, octal, UX4 and other types with removable gold plated machined phosphor bronze or silver plated brass contacts, CALL FOR $$

You'll find it on page 16 of the catalogue.
Their phone number is: (503) 470-8650, their fax: 470-8651
and their email address: mpercy@svn.net
Regards,
Thanks Detlof. No hurry though as I just had my amp spec'd and cleaned and will wait until further maintenance is required before considering changing the tube sockets. The materials used are new to me for this application and I will go to the site when AOL is not bogged down as much as it is right now. I believe that Percy also sells Sorbothane which I need for an upcoming project.
Be advised that changing tube sockets isn't anything like changing a capacitor. On 9 pin, all nine pins have wires soldered, some of them have multiple wires and/or resistors. Then you have to get in there with a probe from your meter while it's powered up. Let me get my dictionary and make sure I spell 'lethal voltages present' correctly.
Yes, they carry orothane stuff ans Kitch, you sure know how to spell!!
Cheers