Bryston 28B SST

Hi Rugyboogie, I have read a few of your threads in the past and you have some very nice pces but what you wrote;

"not very open nor did I find them dynamic"

just doesn't add up and that's why I addressed such as you know allot of others will be reading. Your follow up info. you just provided all I can think of is the Dart pre. being a mismatch.

We all have our own opinions and that's fine, that's all they are but you are exsperienced so you should have tried to find out what was going on, in the end if you didn't like them well that's okay to.

Something was choking them!, either your Dart, cables, power source I don't know I wasn't there.

You have MAXX2's and I have MBL 101e's and from my exspearience I would say yours are easier to drive so why am I not having any of those issues you made reference too nor are others I know driving different speakers for example; Bryceeboy set-up with Soundlab A-1's?

09-26-10: Bryceeboy
The first time I ever got what the SET group was raving about was when I inserted the 28B Squared into my system. I am a tube guy through and through but when I placed these in my system nothing had come close in the past. I own Soundlab A-1's which are a bear to drive but these things can make them growl or purr like a kitty. Great amps IMHO! Good luck.

Rugyboogie Thanks for the invite, would enjoy meeting hearing your set-up.

P.S. I also owned ML 33s.

.
How does the 28B SST stand up to low impedances?? Bryston clearly lists the power output of the 7B SST at 4 ohms. But, it is a glaring omission when it fails to mention the 4 ohm rating for the 28B SST. Bryston mentions that the 28B SST is a bridged design. To me that is a red flag to be wary of its performance at low impedances. I have a set of Infinity Kappa 9's that dip to one ohm, I'd like to see the 28B SST take a stab at them.
.

Hi Mitch4t, get a pair and try and let us know. I recall seeing your similar question somewhere else sometime ago.

.
The review in the link below from a review in stereophile magazine addresses the low impedance issue. The review may answer the questions why some users above thought the 28B SST was lacking in dynamics. If you have speakers that go to 4 ohms or below, the 28B SST may not be a good match.

http://www.stereophile.com/solidpoweramps/108bry/
.

Hi Mitch4t, thanks for the info. but that's a review and means nothing to me, are you telling us that this is what you rely on or do you rely on your own ears?

Secondly what amps are we talking about? my Bryston amps are the newest "SQUARED" design and these are not so we should make sure we are all on the same page.