1. Home
  2. speakers
  3. 128578-80822

Tekton Double Impacts

Anybody out there heard these??

I have dedicated audio room 14.5x20.5x9 ft.  Currently have Marantz Reference CD/Intergrated paired to Magnepan 1.7's with REL T-7 subs.  For the vast majority of music I love this system.  The only nit pick is that it is lacking/limited in covering say below 35 hz or so.  For the first time actually buzzed the panel with an organ sacd. Bummer.  Thought of upgrading subs to rythmicks but then I will need to high pass the 1.7's.  Really don't want to deal with that approach.

Enter the Double Impacts.  Many interesting things here.  Would certainly have a different set of strengths here.  Dynamics, claimed bottom octave coverage in one package, suspect a good match to current electronics.

I've read all the threads here so we do not need to rehash that.  Just wondering if others out there have FIRST HAND experience with these or other Tekton speakers

Thanks.
corelli
charles1dad's avatar
charles1dad
6,996 posts
 
Hi Bullitt,
Your conclusion/speculation regarding the 2A3 Triode Labs amplifier and Double Impact pairing is interesting and the polar opposite of what Teajay achieved  in his main/reviewing system ("best combination yet in his system "). Another poster who visited and hear Teajay’s system with this combination said that the sound was fantastic. Their comments were posted earlier in this thread.
Charles
almarg's avatar
almarg
8,673 posts
 
P.S. to my previous post: If the following page corresponds to your Truth preamp, it has an active output stage which in terms of impedance should have no problem driving pretty much anything.

http://www.thehornshoppe.com/the_truth_pre_amp.html

Good luck. Regards,
-- Al

david_ten
2,509 posts
 
@lpretiring : You may want to check with @almarg before proceeding. Edit: See that @almarg has already responded.
lpretiring
195 posts
 
Charles,
Thank you for a path to begin to figure this out. I will find out the gain of the amp.

What I don't understand is the relation between the 3 factors of wattage-sensitivity-gain as it applies to the pre amp amp and speaker.

I understand in general that a more sensitive speaker requires less power to reach certain decibel levels but then how does the gain of the pre amp and amp factor in? 

Does anyone wonder how I could have been involved in this hobby since the late 60's and understand so little?

 Please don't answer that last comment.

Bullitt

Triode Labs as far as I know is custom made only. He will build with 4 ohms no problem. But again as far as I know, no auditions, no returns. Ouch!

   LP

   

charles1dad's avatar
charles1dad
6,996 posts
 
Hi Al,
So although the Truth has an active output stage it’s still considered a passive preamplifier due to zero gain? Is this a "buffered" component?
Charles
More to discover