Tekton Double Impacts


Anybody out there heard these??

I have dedicated audio room 14.5x20.5x9 ft.  Currently have Marantz Reference CD/Intergrated paired to Magnepan 1.7's with REL T-7 subs.  For the vast majority of music I love this system.  The only nit pick is that it is lacking/limited in covering say below 35 hz or so.  For the first time actually buzzed the panel with an organ sacd. Bummer.  Thought of upgrading subs to rythmicks but then I will need to high pass the 1.7's.  Really don't want to deal with that approach.

Enter the Double Impacts.  Many interesting things here.  Would certainly have a different set of strengths here.  Dynamics, claimed bottom octave coverage in one package, suspect a good match to current electronics.

I've read all the threads here so we do not need to rehash that.  Just wondering if others out there have FIRST HAND experience with these or other Tekton speakers

Thanks.
corelli
Sbayne,
Regarding ozzy moving on away from the Tektons. Maybe so but no matter what speaker he chooses down the road he’ll have to hear them in his system. He needs to determine whether or not a given speaker is a match for his amplifier and system overall. Iwill admit it seems a bit strange given his emails, calls and posts on this thread he has gotten so little in response. 

Charles

Charles - I shouldn’t have been so short in my post.

My thinking is Ozzy is well known and respected on these boards. He wants the manufacturer to respond to his inquires, specifically show him the impedance curve. Many have told him and believe (including yourself) his amps would be a fine pairing with the DIs but he wants to confirm it himself by seeing the data or at least talking to Eric about it. That hasn’t happened - which I agree should.

Its been suggested he take the 60 day home audition but Ozzy indicated the speakers are too big and heavy for him to do that.

Ozzy also indicated he doesn’t want to take a chance on a $3,000 speaker without getting this info.

So, I was just trying to say it seems like the DIs aren’t for him. I’m not criticizing his posts it just seems logical too move on.

Scott


Scott,
I didn't infer that your comments were critical of Ozzy's post at all. Even if he gets the impeadanc curve information he seeks he'd still need to actually hear this speaker with his Atma-sphere amplifiers.  My point to him is There's an abundance of posts here that strongly indicate the DI  has easy load characteristics. I thought this would provide some degree encouragement and optimism. 
Charles 
Scott  I have high regard to Ozzy he a great contributor here at Agon, Markr discover CT cables thru his thread, and I heard it at Markr.And it’s the best speaker cables For my Andra...I respect that He wants more info on the DI.But if he audition The DI my bet He will keep them, I wish I live close to Him so I can help him unloading the speakers.And He is more than welcome to listen to my monitor...and serve Him good barbecue...😀
IMO Ozzy’s concern about how the DI’s impedance may vary over the frequency range is well founded, especially given the practical issues he mentioned that would be involved in auditioning and possibly having to return the speakers. The 4.1 ohm output impedance of his Atma-Sphere M60s is, as far as I can recall, more than twice as high as the output impedance of any other amplifier that has been reported in this thread as having been used with a DI. (For example the LTA MZ2 has a specified output impedance of 2 ohms, and according to a TAS review the Frankenstein, at least in its MkII version, has an output impedance of 1.8 ohms).

The Zero autoformers he has can certainly reduce any impedance-related issues he might have pairing the M60 with the DI, and the capabilities of his DEQX might also be able to help with any such issues, but to what degree and with what audible side-effects is obviously difficult or impossible to predict.

Best regards,
-- Al