Synergistic New Tesla Line...Any comments?

Yes TBG, a Percision AC power cord comes with the Powercell 10SE it has a 32 amp powercon connector and can only be used on the Powercell 10 SE.

Barcardi, no the MPC's in the bottom outlets do not clear the bottom when using the MIGS. I had to place an additional 1 inch under the MIG's for the MPC's to clear. I happened to have 3 Herbie's Audio SuperSonic Stabilizers that are 1 incg thick to raise the MIG's higher. A small piece of wood would also do the trick.

Ok guys, I am going to try one set of the MIGS's.

The BIG quaestion is where will it have the best impact??

1. I have a Cary 306 Pro which has huge spiked feet that I dont think should be removed.

2. I have a Cary XP-10 Preamp

3. Pass Labs X350.5 Amp (150 lbs)

4. and a Powercell 10SE which nows has high sharp composite spikes underneath it.

5. alll SR cables , interconnects, speaker, power.

So, again where is the best place to place one set based on my system???

So, again where is the best place to place one set based on my system???
Ozzy (System | Reviews | Threads | Answers)

MIGs are like Lay's potato chips. You can't have just one.

It's the famous audio Cumulative Effect.

Ozzy, I don't have much certainty about this but were I you, I would try the amp first.

Tvad, still beating on the drum?

Tvad, still beating on the drum?
Tbg (System | Threads | Answers)

Yup.

Do you refute the Cumulative Effect?