I guess I am changing Internet service providers. Three help tickets and no communication and no website. Will keep you posted. Please email me to my personal rgrost@gmail.com...
Bob
CT |
Glad to hear all is well. It's probably a DNS error. Something like that can affect some areas of the country but not others.
Need to check out the ICs as soon as Bob gets this resolved.
|
I was just contacted by my web master and there is a problem. We are working on it and will keep you posted...thanks!
Bob |
Bob, i just now tried to access your web site and cannot load the page, getting a "Site cannot be reached" error.
regards,
bob |
@lak
Bob contacted me last Tuesday after I left him a voicemail a few days before. He took extra time to talk with me about a sibilance problem I am having since I moved and reset up my system. I sent him some texts with pictures attached and am waiting for him to get back with some more advisement. He was very helpful and concerned with helping me set my system up better. I am sure you will here from him soon. |
I have heard of problems with the website but it has come right up when I checked it. I sure hope we are not out of business! It would be hard to explain why we have so many orders... |
I received an email from Bob yesterday. He’s sending me some power cords this week. Must just be having site issues that will hopefully be resolved soon.
|
Has anyone tried to phone Bob in Arizona?
I have to believe he is still in business!
|
Crazy as it sounds, hope they're still in business. Website has been down for a week now...
I love my GM speaker cables.
|
Anyone have any insights on why their website has been down for days?
|
doitwithlife I used to have HF Reveal PC feeding to my DAC. It made very big improvement after switching to Matrix.
If your budget is tight. I suggest you to get a Nitro PC from Mad Scientist Audio feeding your P15. It is incredible in noise filtering (Yes, I know what P15 is doing but just try yourself). |
By any chance, has anyone compared a CT Matrix pc to a Transparent MM2 pc? |
Got the Matrix PC in and found I was much happier feeding my P15 regenerator with it over my HF Reveal. Reveal is now feeding the dac and have a Pangea14SE MkII feeding the pre.
One change that came with the Matrix I just don’t understand. Maybe someone has some insight. When listening to what I might call "concert level" the pre output was around 40. This is with the factory cord as well as the HF. With the Matrix, that level is now just over 30. Still drawing the same amps, just a much louder system.
I’d like to look at bringing more of the goodness into my system and looking at a few options with limited funds. I’m thinking that getting PCs for the mono blocks should be next. Question I have with the regenerator clean output and though a 1 meter PC would the extreme blue be a suitable fit or would I be losing to much by not holding out for a pair of Matrix? Those $$ might be then used toward speaker cables or ICs
Any similar experiences? |
Just wanted to give an update from my post on 1/25/19.
Bob finally got back to me and sincerely apologized for not getting back to me in a timely manner.
I sent Bob my red pc to repair. It was leaking black granules from the plug end. He said he would fix it and return it promptly, which was in early December.
Bob was really gracious and instead of fixing my pc he gave me a new Matrix pc for my troubles. That is going the extra miles for his customers and I really appreciated his generosity.
Thank You Bob, your products are top notch and so is your customer service!
Best,
Joe |
The same here in SE MI jl35. Wish my SET amp wasn’t in for repair though.
Poor Bob......has a wife demanding he upgrade his audio system. I wouldn’t have ever dreamed of such a scenario. It’s no wonder Bob loves his wife, I’ve never met her and I do too! 😀🔉 |
Mid Michigan is closed for snow cold wind. Perfect day for listening. Though only down to 22hz... |
Hi Everyone,
Bob from Cerious. What am I working on? I am working on developing a USB cable, but am trying to deal with the shortcomings of the USB interface. Basically my cables are exposing flaws in the medium that render music "analytical" rather than the organic sound you have come to expect from Cerious and just not a sound I want to listen to for extended periods. The root problem is the +5V going through the cable which is noisy coming from the computer or source device. I have solved this by generating a separate +5V in place of the normal voltage but I have never produced a powered cable before so am working on packaging and despite how pricey the Matrix is I strive for sanity in pricing. Will keep you posted.
My wife has ordered me to upgrade our entire system as we went to a friend's house who has the latest ReacT speakers we made several years ago with analog front end and one of my custom racks that feature reactive damping and Carbon Fiber main structure. She ordered me to buy a top of the line VPI turntable, build us a custom rack, and custom ReacT speakers with subwoofers good to 15 Hertz (she is a bass freak...who knew?). Women can be so demanding! Oh and I need to make us custom amps because she likes to listen to rock concerts at rock concert levels (who knew?). God I love this woman...
So I will be busy for a while so no need to worry that the Matrix will be obsolete anytime soon.
Hugs...and keep warm! |
@tubes444
I have stopped searching for cables. I’m very satisfied with the quality of the Matrix line of cables. I have been concentrating on other areas of my system as a result. The Matrix IC’s had a big impact in my setup but you better ask Bob about the length. I dont own a Pass Labs amp but I bet you will be amazed.
Lance |
Bob..anything new on the horizon with Cerious Technology cables..? |
Lance, This is a late question base on G Matric cable thread start date. I'm changing my equipment rack to support twin Pass Labs Mono blocks. At present I'm using Acoustic Zen Silver Ref ll's balanced 24"L. New setup will require longer runs. Are you still on board with the G Matric and their performance after almost 2 yrs?? I would greatly appreciate your feed back. Before I pull my trigger on new cables.. |
@lak,
Yes, I don't think either is going to be bad. I've gotten both cables blind so don't know what to expect out of the Matrix. From what I read in the forums it should be an impressive upgrade. My thought is I'll end up like you, Matrix doing the heavy lifting and the HF feeding the Dac
|
@doitwithlife, Sounds to me like you can't lose either way. I ended up using my Graphene Matrix Gold on my Hemisphere and moved my HFU power cord to my Dac. You win either way. ;-)
|
Just ordered a graphene matrix gold. Currently feeding a P15 regenerator with a HFC Reveal. Figure I'll A/B the cables feeding the P15 then use the loser to feed the DAC. Anyone have experience with a similar configuration? |
Hi Bob,
I sent you some emails over the course of a few weeks, which went unanswered. Maybe you could give me a reply. I don’t really want to discuss the problem on this site.
Joe
|
Hi Everyone,
A quick note on why the Matrix sounds the same in different lengths. Most traditional cables are mass produced in a spool and this wire is them spooled off and cut to length. So...each length will sound different. Since we hand make each conductor, we computer model each conductor at each length and build it to the exact model length. In simpler terms, we make each conductor differently varying by length. The "mix" of components and gauge of metal based conductors will vary by how long it is. We design and construct cables to perform in a specific manner and dial in the parameters of each conductor to ensure they all perform like a Matrix conductor should each and every time. This is the ONLY way to ensure that you have a cable that performs the way as designed. Otherwise you get to play Goldilocks with lengths until you find one that is "just right..."
Bob
CT |
that's good. it seems physics in traditional wire don't apply to matrix |
littlecx,
I have a couple of 12 footers also along with several 6 footers. No difference in sound that I can tell.
ozzy
|
I have a matrix 12 foot power cord and I do not notice a deterioration of music with a shorter matrix power cord.
|
I am talking about pc. I have the shortest one. 3ft. |
@littlecx, your question might be more beneficial if you were to specify which Matrix cable you are talking about and what cable length. |
does the length of cable affect the sound quality of mtarix? |
I've never had either Kimber or Audio Art, so I'm not much help. I will say that Bob is absolutely wonderful to work with, and you can't go wrong with trying out the Matrix XLR's .
Dave
|
Hello,
Anybody here had experience comparing Graphene Matrix XLR vs. Kimber Kable KS-1116 XLR (or KS-1126 XLR) vs. Audio Art Statement e XLR interconnect? Please kindly help me with your thought.
Thank You
|
Sorry about the ad disappearing...My darn customers keep on buying! You GUYS...
I will offer this deal through Christmas to repeat customers and another week for newbies. You can just email me directly. We are going a little crazy here but all in a good way...
Bob
Cerious Technologies |
Yep. I did the deal. A 20 amp GM PC with gold ends for my amp and a 15 amp GM PC with gold ends for my HT processor. Some fun for the Holidays :-)
Dave
|
|
Unfortunately, you missed it. The listing was only for one day - Cyber Monday. Did anyone take advantage of this Matrix Power Cord deal? If you did, please share if you are getting the rhodium or the gold ends.
Thanks,
Dave
|
|
Happy Cyber Monday everybody! This is Bob from Cerious Technologies. Well you asked for it and here it is. Cyber Monday deal, buy one Graphene Matrix power cord at the regular price and get a second one for HALF price! The half price cord can be any of equal or shorter length than the first. So...No...you cannot buy a 3 foot cord at regular price and get a 16 foot cord for half price. The Black Friday blowout of Graphene Extreme is going great so feel free to add to the insanity. Thank you all so much and we have an ad on Audiogon or you can contact us directly.
Bob
CT |
I had the Cardas Clear Beyond and sold it. There was much that I liked about it, but the rhodium ends tainted the sound for me (I don’t seem to like rhodium). I’m enjoying my Audioquest Hurricane much much more. I’ve been wanting to try the Matrix with gold ends, but I can’t seem to get one :-)
Dave
|
Any body heard dream state audio lucid dream / dream catcher PCs in their system? How about snake river audio Cottonmouth PC? I find cottonmouth very engaging on my CD player. Wonder how matrix / extreme compare to these cords. Thanks.
|
Unfortunalely I've not heard the Cardas Clear Beyond power cord. |
I am curious how cerious Extreme and Matrix power cords would compare to Cardas clear beyond power cord. I am using clear beyond on tube amps (coincident Frankenstein mono blocks). Thanks guys. |
Ordering two pair of Matrix Damping Squared IC's tomorrow so I'm very thankful! Thanks to Bob for all of his great products and service. |
Happy Thanksgiving everyone!
Bob
CT |
I have 2 sets of single ended Ic’s, Speaker cables with custom jumpers, and a 2 gang outlet box Bob made me from his best power cord wire.
Love it all and Bob is a pleasure to deal with.
In my system it absolutely beats the Audience AU 24Sx that it replaced at less than half retail pricing.
I am looking to upgrade to a full power loom in the future.
Everything needs at least 3 weeks to sound its best. My speaker cables where all over the first week. Man are they good though. Due to room constraints I only have my Personas 20 inches from the front wall. The Matrix still gives me a deep stage with room in between the players front to back. Fantastic layering of instruments. Vocals have a beautiful texture. Tight bass with delicate highs. Really a very nice cable top to bottom. Highly Recommended !!
|
I'd like to add that all of the Matrix products that I've added to my system (power cable, digital cable, interconnects, speaker cable) sounded very good directly out of the box and in my opinion only seem to sound better with use.
|
Totally agreed. They are an investment, but still a bargain in terms of price to performance ratio. I've got to get one more for my phono preamp, and then I will be all set. I love these cables! |
After months of dragging my feet I finally ordered the Matrix speaker cables and they arrived today. Having owned the GE's previously I was acquainted with their build quality and massive size and weight and the Matrix don't disappoint in his regard.
I was prepared to endure listening to subpar music as these cables burned in but to my surprise they sound amazingly good right out of the shoot. Like stupid good. I'm anxiously awaiting just how good they'll sound after burning in.
Bob was a pleasure to work with and I appreciate his prompt shipping. It's a no brainer now.....a full loom of Matrix cables is in my future.....with no foot dragging this time! |
Has anyone compared the Cerius Damping squared interconnects to Acrolink cables, particularly the expensive Mexcel ones?
|
