Replacing generic RECEPTACLES


How important is it to replace your generic receptacles with audio grade receptacles . I already replaced my stock power cords to high end Shunyatas. Would it still be necessary to still change my generic receptacles to audio grade? 
128x128Ag insider logo xs@2xtattooedtrackman
secretguy.........Any excuse to waste money?????? I dont understand your comment....Please explain...
You can use a 20a receptacle on a 15a line. You just can’t use a 20a powercord plug on a 15a line / 20a receptacle, otherwise you will have an ISSUE! Only use 15a powercords.
have a dedicated line for my Krell FPB 600 amp and my ARC Ref 6 preamp which i will be adding the Furutech GTX-d r. But not for my Rega Isis cdp. Would you also recommend a dedicated line for the cdp too?

It would make sense to add a second 20 amp dedicated line. You can use your CDP, and in the future add another digital device such as a dac or streamer. It’s best to isolate analogue from digital.

Or you can keep the 15A line as long as it is properly grounded at the receptacle and at the circuit panel.



The 2 double receptacles on your 20 amp line equals one 20A dedicated line.
It's fine to run an amp plus preamp on the same line; the 2 components will draw less than 20 amps. It would not be a good idea to run monoblocks on the same AC line due to the high current draw.
czarivey, Did you buy a used home? Or move into a preexisting apartment? I guarantee the duplex outlets there are all old as the building is. No normal person replaces any duplex until they are broken. that usually means the duplex outlets when YOU move in, are already 10 to 40 years old.   When I move into a new apartment, I replace all the outlets with new ones right off. Ditto the light switches.(since I stay more than ten years.. it just makes sense to me.)So generally replacing outlets is more like replacing nearly broken down crap that works, but does so poorly, with something that will work well for years to come.++++++++++++++++++++++++++++++++++++++++++++++++++++TTman.. As for the quad 20 amp circuit. That is all you need, usually. Unless you like to play music at over 100dB (which is really loud)In that case it will not matter anyway, since you will soon be deaf. and the distortion in your ears will mask any in the equipment.
So I am saying you do not need a separate circuit for your CDP, or preamp, or any other equipment.  If you want some improvement, I would suggest getting a small powerline conditioner for your CDP, plugged into the same circuit as the amp.