While it's apples and oranges to your system, I just picked up a Yaqin MC-30L tube integrated amplifier and in ultralinear mode it's rated for 50 wpc @ 8 ohms. Today, it packed ever bit as much punch as my Integra 50.1 receiver that is rated for 135 wpc @ 8 ohms.
Help: WPC for my speakers
I will try to keep this short. New to the hobby and already have upgraded speakers. I now have system audio 10s. They are 88 db and have 8-4 impedance. Min power 50 watts Max 135 watts.
Currently powered by 50 watt exposure super XV. I got the bigger sound, much better clarity and much better tone accuracy with the upgrade. What I lost was the pin point accuracy/ tight bass that my smaller system audios had. I believe this is do to the lack of power I have using the exposure.
Do you all think more power will solve these problems? Second I am looking at a DK design vs1 mkll by LSA group used. This amp would be 160 wpc at 8 ohms and 320 wpc 4 ohm. Will I have to be very carefull about over powering these speaker or should I be ok with this power
Currently powered by 50 watt exposure super XV. I got the bigger sound, much better clarity and much better tone accuracy with the upgrade. What I lost was the pin point accuracy/ tight bass that my smaller system audios had. I believe this is do to the lack of power I have using the exposure.
Do you all think more power will solve these problems? Second I am looking at a DK design vs1 mkll by LSA group used. This amp would be 160 wpc at 8 ohms and 320 wpc 4 ohm. Will I have to be very carefull about over powering these speaker or should I be ok with this power
- ...
- 18 posts total
- 18 posts total