tvad
Responses from tvad
| Tube Pre-amp Noise problems HELP To have the identical problem with different tube preamps and different tubes points to an issue other than with the preamps.Perhaps it's an issue with your power delivery, or your amplifier...or the cleaner as Jea48 says.I'm guessing the annoying... | |
| How much longer will CDs be made? Here's an explanation of the possible audio formats on Blu Ray.As far as I can tell, the bottom line is that the resolution can be higher than SACD, but I'm not aware of any music software supporting the higher resolution. | |
| How much longer will CDs be made? Other than the different format (Blu Ray versus SACD), is there any difference in resolution between the two?Interesting that we're still discussing silver discs, and the majority in this thread appear to believe that discs are going away in the n... | |
| How much longer will CDs be made? Well, I recently purchased a used APL Denon 3910, which I had upgraded to the latest circuitry. I sold my original APL a couple of years ago, and realized it was a bit of a mistake, but I needed to make the change at the time.I'm very happy with t... | |
| Jeff Rowland Pre with Pass Labs X350.5 or X600.5 Thanks, Dave. You saved me some time reading the manual. | |
| Jeff Rowland Pre with Pass Labs X350.5 or X600.5 I require a fixed level output, like that in a tape loop output. I cannot use a line level output to the transceiver. | |
| Jeff Rowland Pre with Pass Labs X350.5 or X600.5 I don't want to bypass the Capri. I want to listen to source "A" in my main system, and also send a line-level signal of source "A" to my second system. Does that fit the bypass feature of the Capri. It doesn't fit what I traditionally consider th... | |
| Jeff Rowland Pre with Pass Labs X350.5 or X600.5 Guido, I send the source's signal (fixed level) through the tape loop's output to a balanced line transceiver, which then sends the signal to a second system. Vice versa, I use the tape loop's input to take the signal from the second system and us... | |
| Jeff Rowland Pre with Pass Labs X350.5 or X600.5 Guido, I'm not certain, but I don't think the Capri's Bypass mode functions the same as a tape loop. | |
| Jeff Rowland Pre with Pass Labs X350.5 or X600.5 Too bad the Capri doesn't have a tape loop (or fixed level outputs). A thing of the past, I suppose...but I still utilize it. | |
| How much longer will CDs be made? What do you think considering our present CD sound versus a Blu Ray type improvement?Psacanli (Threads | Answers)This was already done with SACD and DVD-A being the high definition audio equivalent of Blu Ray.As we know, high def audio was a non-s... | |
| How much longer will CDs be made? CDs are incredibly inexpensive to produce, so there is plenty of room for the retail prices to be lowered before the record companies give up on the format. My bet is that CDs will be produced well beyond the five year mark.There recently was an A... | |
| Want to improve sound of Silverline Prelude II The Creek doesn't match the Prelude II impedance curve, as your listening proves. If you'd rather keep the Creek, then a speaker with a flat impedance curve will match better. I'm not sure the Totem qualifies.Here is an integrated amp that doubles... | |
| Want to improve sound of Silverline Prelude II I own Sonata III loudspeakers, and I have gone through several tube and solid state amplifiers trying to get the speakers to sound balanced and not tipped up. What I have discovered is that in my system, the Sonata III require amplification that d... | |
| tube pre amp with tube / SS /hybrid power amp ? I matched a Lamm LL2 Deluxe tube preamp with a Moscode 401HR (tube/SS hybrid) with outstanding results...one of the best combinations I've ever owned.A friend matches a CJ CT5 tube preamp with the Moscode 401HR with equally good results. |